Infinity Terrain and Operation Flamestrike

Just a quick update to showcase some terrain I’ve made for Infinity over the past couple of week and to highlight my efforts in Operation Flamestrike.

Supply Crates

I built these supply crates quite some time ago now – I think I have images in an older post. The rest of the contents arrived from The Assault Group early this year and I finally got around to finishing them off.

The construction is really simple: matchsticks and cardstock. Rule out 2cm squares on cardstock and then cut them out. Make sure to also cut out a section to insert inside to form a base to put your contents on. Alternatively have another piece for a lid. Glue matchsticks around your cube and lid to form the frame. I then glue the whole thing to a 40mm renedra base. For the contents I used modern 28mm scale weapons from The Assault Group. There’s a bunch of different things there: AK-74s, Drugnovs, M9s, RPGs, SAWs and the shotguns I forget the model of.

Painting them up is easy stuff: heavy coat of Raw Umber; heavy-ish dry brush Mud Puddle; very light dry brush of Bleached Titanium (a bone white). For the inside I also did some hatches of Yellow Oxide. The weapons are all painted black with Gunmetal Gry barrels and wooden details (stocks for example) done in Beige Brown. Simple pieces, look good and make for great supply crate/objective markers or just cover in general.

Bunkers/Barracks

A mate has these half cylinder bunker/barracks buildings which I think were originally for 40k. I liked them when I saw them and decided I’d make something similar. Fast forward to the other week, I finally got around to it.

I wasn’t so sure how it’d all work at first, but in the end it was very easy. Draw out a half circle on foamcore (I have a diameter of 10cm). Cut it out very carefully freehand with an exacto knife and use it as a template for the other half circles. Once they’re all cut out, make sure their fairly even in shape. Draw in where your door is going and cut that out. For a base use 3mm MDF. I’ve used a piece cut to be 15cm long and 10cm wide, plus 2cm kick outs at either end in from of the door. I painted the base and walls first, sponging a camo pattern on the outside wall to distinguish it from the base. Glue those on then measure out your roof from corrugated card. Roll it up to get the bend and make sure it fits right. Paint it up Gunmetal Grey and at that point it is done if you want. You can use PVA to stiffen it up (not too heavy though, you don’t want it to warp). I have a mixture of sand, grey paint and PVA for snow though, make sure it is a relatively dry mix. Once it is solid, paint it white.

For the doors I used thin cardboard and cardstock with magnets glued to the outside of the walls and inside of the doors (6mm diameter, .5mm thick rare earth). Paint them up however you like and you have a removeable door.

Building

Finally I have another building for my Ariadna snow table.

I used 3mm MDF for the base and the floor inside (it is raised off the base by 2cm). The base measures about 10cm by 18cm (roughly) and the building itself is about 10cm square. Standard 5mm black foamcore was used for the building itself. The ramps and roof are from a heavy-ish cardstock (Be Natural meusli bar box). I added three 2cm strips of the same cardstock to reinforce the roof. I also added a 1cm strip of cardstock around the base of the walls inside for the skirting. The exterior has a band of corrugated card round the base. Finally the doors are done the usual way: 6mm rare earth magents on the outside walls and interior of the door on cardstock tabs glued to the cardboard door proper.

Colours used to paint the structure include Natural Grey, Slate Grey, White, Gunmetal Grey (all exterior), Pistachio (inside wall), Antique White (skirting and doors) and Raw Umber (floor, also sponged lightly with white). The snow on the roof is done the same way as the bunker/barracks buildings.

Operation Flamestrike

I’ve been really enthused about Operation Flamestrike. If you play Infinity and aren’t already signed up, get into it here. You can also see my commander profile where you can access my battle reports which currently include:

Operation Red Oilfield

Operation Infallible Girlfriend

Operation Overpriced Hawk

Operation Smith the Wizard

I believe you can access these without signing up, if you are signed up, ratings, comments and commendations are appreciated.

Unfortunately I can’t get as many games as I would like, but I’m playing as much as I can. This campaign means my big pile of Bolt Action painting is on ice while I get more Infinity models done plus work on my Infinity snow table.

Keep an eye on my Operation Flamestrike commander proflie for more battle reports though, I may also shift them all over to here in the future too.

That’s all for now, happy wargaming.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s